Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
1
Torque Multiplier piece, to be used as OEM 303-1611
2
Adapter plate, to be used as OEM 303-1611-2
3
Special adapter, to be used as OEM 303-1611-1
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third-parties.
INTENDED USE
This tool set serves to loosen and tighten the crankshaft pulley screw on e.g. Ford engines:
1.0 EcoBoost, 1.0 Duratec, 1.1 Duratec, 2.0 Duratorq-TDCi, 2.0 EcoBlue Diesel.
Gear ratio of the torque multiplier: 1:5
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY NOTES
•
Keep children and other unauthorised persons away from the work area.
•
Do not let any children play with the tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the contained tools on the vehicle battery. Danger of short circuit.
•
Caution when working on the running engines. Loose clothing, tools and other objects may be
caught by rotating parts and cause severe injuries.
•
Be careful when working on hot engines because of the risk of burn injuries!
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
These instructions serve as brief information and never replace the workshop manual. Please
always obtain technical specifications such as torque values and instructions on disassembly
and assembly from the vehicle-specific service literature.
•
When working with this tool, always wear protective gloves and safety glasses.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Torque Multiplier Set for Ford
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 70917
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
