S&P CAD-REG Manual página 33

3. Information on the status of the by-pass
4. Information on the status of fi lters and temperature probes
6.1. BASIC FUNCTIONS OF THE BUTTONS IN USER MODE
The buttons perform different functions depending on whether a short or long press (> 6 ") is performed. Then you indi-
cates the functionalities of each button:
Short press: Select the on/off state of the regulator.
Long press: Activate and deactivate time programming.
ON/OFF
Short press: Select the operating mode of the bypass Off / Auto / On.
Long press: Access the confi guration menu.
MODE
Short press:
With fan speed display, increase speed.
With fan speed display, without use.
With temperature setpoint display, increase the setpoint.
UP
Long press:
Allows you to confi gure the type of display. By successive long presses it is shown:
- Display current fan speed
- Display of fan speed setpoint
- Display of the supply temperature setpoint
Short press:
With fan speed display, the speed decreases.
With display of the current fan speed, without use.
With temperature setpoint display, the setpoint decreases.
DOWN
Long press:
Access the display of the operating hours of filter/s. To return to the main screen, wait a few seconds
without manipulating the control.
Estado del by-pass
Bypass status
Modo verano
summer mode
Modo invierno
winter mode
ºC
By-pass abierto
open by-pass
By-pass cerrado (indicador apagado)
closed by-pass (OFF indicator)
Temperatura de consigna
Setpoint temperature
Fan speed
1: fan speed lower than 33% of maximum speed.
2: fan speed between 33% and 66% of maximum speed.
3: fan speed higher than 66% of maximum speed.
Dirty fi lters
EN
33