cecotec CREMMAET MACCHIA Manual De Instrucciones página 52

ENGLISH
Switching on and preheating
- Connect the machine to the mains and press the power switch at the back of the machine.
- Press and hold the power switch for at least 0.3 seconds. The corresponding indicator
light will flash, and the machine will enter the self-test state.
- Place a cup under the coffee spout.
- The manual cleaning indicator will remain illuminated, and the power switch indicator
light will flash; then, the machine will enter the preheating function and the automatic
cleaning state.
- When preheating is complete, the Single Espresso, Double Espresso, Americano and
Manual cleaning indicator lights will remain illuminated, and the machine will then enter
standby mode. It is now ready for use.
Preparing a cup of espresso coffee
- Place a cup under the coffee spout.
- Press and hold down the Single Espresso icon for at least 2 seconds; the machine will
start to prepare a cup of espresso. The single espresso indicator light will light up
steadily during the preparation process.
- When the espresso preparation is finished, the machine automatically enters standby
mode.
NOTE: you can press the espresso icon during coffee preparation to cancel the process.
Preparing a double cup of espresso coffee
- Place a cup under the coffee spout.
- Press and hold down the Double Espresso icon for at least 2 seconds; the machine will
start to prepare a double cup of espresso. The double espresso indicator light will light
up steadily during the preparation process.
NOTE: double espresso is achieved by preparing two single espresso cycles continuously, so
you should not remove the cup during the preparation process.
- When the double espresso preparation is finished, the machine automatically enters
standby mode.
NOTE: you can press the double espresso icon during coffee preparation to cancel the
process.
52