Descargar Imprimir esta página

Milwaukee 2482-20 Manual Del Operador página 3

Lijadora de banda de 13 mm x 457 mm (1/2' x 18') y lijadora de banda de 10 mm x 330 mm (3/8' x 13') m12 fuel

Publicidad

Idiomas disponibles

Idiomas disponibles

that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
BANDFILES
•Never place your hand near the rotating accessory.
Accessory may kick back over your hand.
•Never lay the power tool down until the acces-
sory has come to a complete stop. The spinning
wheel may grab the surface and pull the power tool
out of your control.
•Do not use tool for wet grinding. Grinding with
water could cause electrical shock.
•Do not operate the power tool near flammable
materials. Do not operate the power tool while
placed on a combustible surface such as wood.
Sparks could ignite these materials.
•Do not operate tool while in storage position.
To reduce the risk of injury, when
WARNING
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
SFM
No Load Surface Feet per Minute (SFM)
Read Operator's Manual
To reduce the risk of injury, wear safety
goggles or glasses with side shields
when operating or servicing the tool.
Always wear gloves and personal
protective equipment.
Forward
Reverse
UL Listing for Canada and U.S.
US
C
FUNCTIONAL DESCRIPTION
2
3
1
17
16
15
14
13
12
1. Sanding belt
2. Contact wheel
3. Arm
4. Safety latch
5. Thumbscrew
6. Arm adjust clamp
7. Drive wheel
8. Belt guard
3
4
5
6
9. Speed indicator
10. Direction indicator
11. MODE button
12. Handle
13. Lock-on button
14. Trigger
15. Trigger flipper, lock-off
16. Work light LED
17. Spark flap
7
8
9
10
11

Publicidad

loading

Este manual también es adecuado para:

2483-20