Ferroli EGEA TECH 200 HT Manual De Uso, Instalación Y Mantenimiento página 143

EGEA TECH
3.9.1 Using the keys while navigating in the menus
Symbol
Within a menu or submenu
Allows you to return to the previous
menu
Allows access to the next menu or
to the modification screen of the
selected parameter
+
Allows you to move within the menu
-
3.9.2 Menu rtc - TIME, DAY, DATE SETTING
To set the clock it is necessary to access the Rtc menu , by
pressing the "SET" key the value from "t01" to "t06" will
appear.
Value Description
t01 Hours
t02 Minutes
Day of the week
t03 (1= Monday... - 7=
Sunday)
t04 Day of the month
t05 Month
t06 Year
Level: U=user menu - I=installer menu
NOTE: for a CASCADE system, the clock setting must
be performed only on the MASTER. Once modified, it will
be necessary to power off and power on the MASTER so
that the latter communicates the set time to the SLAVEs.
By pressing the "SET"
modified, its value can be modified using the "+" and "-" keys.
Then press the "SET"
the modification) and the "ON/OFF"
3.9.3 Sch MENU - TIME BANDS PROGRAMMING
Before activating the weekly programming it is neces-
sary to set the time, day and date of the appliance.
NOTE: in case of application of several units in cascade, the
programming of the time bands must be performed only on the
master unit.
To set the weekly programming, access the menu Sch.
By pressing the "SET"
ar and by pressing the "SET"
lue "0" will appear (it means that time band program-
200 HT - 260 HT
Action
While editing a parameter
Allows you to return to the previous
menu without saving the changes
made
If pressed for more than 3 seconds, it
allows saving the entered parameter
value and returning to the previous
menu.
Saving will be confirmed by a beep.
Allows you to increase or decrease
the value of the selected parameter.
Minimum Value
value maximum
00 23
00 59
0 6
1 31
1 12
20 50
key again on the parameter to be
key to confirm (a beep will confirm
key to exit the menu.
key, "d_0" will appe-
key again, the va-
cod. 3540000420 - Rev. 03 - 09/2023
ming is disabled, default value). To activate time band
programming, use the "+" and "-" keys to bring the value to "1".
Subsequently you can choose the days on which to set the
programming according to the values in the table:
Value
d_1 Monday
d_2 Tuesday
d_3 Wednesday
d_4 Thursday
d_5 Friday
d_6 Saturday
d_7 Sunday
Level: U=user menu - I=installer menu
Weekly programming allows you to define 6 distinct operating
time bands for each day of the week.
Level
Value
U / I
d1A Time slot 1
U / I
d1b Time slot 2
d1c Time slot 3
U / I
d1d Time slot 4
d1E Time slot 5
U / I
d1F Time slot 6
U / I
Level: U=user menu - I=installer menu
U / I
For each band it is possible to define the operating mode (stan-
dard or silenced), the set point, the start and end time and, in
the case of a cascade of water heaters.
For example: by accessing the "d1A" menu, by pressing the
"SET" key and scrolling with the "+" and "-" keys, the values
from "1A1" to "1A9" will appear.
Value Description
Enabling/Disa-
1A1
bling time band 1
1A2 Band 1 start time
1A3 Time slot 1 starts
1A4 Band 1 end time
Band 1 end
1A5
minutes
Band 1 operating
1A6
mode
1A7 Band 1 setpoint
Enabling/Disa-
1A8 bling Silent mode
in band 1
Cascade level in
1A9
band 1
Level: U=user menu - I=installer menu
By pressing the "SET"
modified, its value can be modified using the "+" and "-" keys.
Description
Description
Unit of
default min max mea-
sure
0 0 1 - (0=disabled, 1=enabled)
00 00 23 ora 00:23
00 00 45 min 00, 15, 30, 45
00 00 23 ora 00:23
00 00 45 min 00, 15, 30, 45
2:5= (2=ECO, 3=AUTO,
2 2 5 - 4=BOOSTER, 5=ELEC-
TRIC HEATING)
38:62 / 38:75 (depending
50 38 75 °C
on the mode selected)
0 0 1 - (0=disabled, 1=enabled)
0:2= (0=min, 1=medium,
0 0 2 -
2=max)
key again on the parameter to be
EN
Level
U / I
U / I
U / I
U / I
U / I
U / I
U / I
Level
U / I
U / I
U / I
U / I
U / I
U / I
Note Level
U / I
U / I
U / I
U / I
U / I
U / I
U / I
U / I
U / I
143