Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT
SAFETY
iNFORMATiON
14. Cut small brush and saplings with extreme
care.
Slender
material
may catch
in chain
and be
whipped toward
you. This could also pull you
off balance.
15. When cutting
limb or tree trunk that is under
tension,
use extreme
caution. Be alert for wood
springing back. When wood tension is released,
limb could spring back and strike operator caus-
ing severe injury or death.
16. Carry chain saw from one place to another
• with saw stopped and unplugged
• by holding front handle (never use hand guard
as handle)
• with finger offtrigger
• with guide bar and chain to rear
,_
WARNING:
This product contains
chemicals
known
to the State of Cali-
fornia to cause cancer or birth defects,
or other reproductive
harm.
_lb WARNING: Some dust created
by
power sanding, sawing, grinding,
drill-
ing, and other construction
activities
contains chemicals known (to the state
of California)
to cause cancer, birth de-
fects, or other reproductive
harm. Some
examples
of these chemicals
are:
• lead from lead-based
paints
• crystalline
silica from bricks and ce-
ment and other masonry
products
• arsenic
and chromium
from
chemi-
cally-treated
[umber
Your risk from these exposures
varies,
depending
on how often
you do this
type of work. To reduce
your exposure
to these chemicals:
work in a well venti-
lated area, and work with approved safety
equipment,
such as those
dust masks
that are specially
designed
to filter out
microscopic
particles.
KICKBACK
A
INk WAR NING: Kickback
may occur
when
the nose
or tip of the guide
bar touches
an object,
or when
the wood
closes
in
and
pinches
the
saw
chain
in the
cut.
Tip contact
in some
cases
may
cause
a
lightning
fast reverse
reaction,
kicking
the
guide
bar up and back towards
the opera-
tor. Pinching
the saw chain
along
the top
of the guide
bar may push the guide
bar
rapidly
back towards
the operator.
Either
of these
reactions
may cause you to lose
control
of the saw which
could
result
in
serious
injury
to user.
Kickback
Safety
Devices
On This
Saw
This saw has a low-kickback
chain and reduced
kickback
guide bar. Both items reduce the chance of
kickback.
Kickback
can still occur with this saw.
Follow
assembly
instructions
on page 9. Do not
remove front hand guard. Do not replace front hand
guard with substitute.
The following
steps will reduce the risk of kickback.
• Use both hands to grip saw while saw is running.
Use firm grip. Thumbs
and fingers
must
wrap
around saw handles.
• Keep all safety items in place on saw. Make sure
they work properly.
• Do not overreach
or cut above shoulder
height.
• Keep solid footing and balance
at all times.
• Stand slightly to left side of saw. This keeps your
body from being in direct line with chain.
• Do not let guide bar nose touch anything
when
chain is moving
(see Figure 1).
Figure
1 - Kickback
Hazard Example: Do Not
Let Nose of Guide Bar
Touch
Object
While
Chain is Moving
Publicidad
