Publicidad
Idiomas disponibles
Idiomas disponibles
Safety instructions for biscuit joiners
■
Disc milling cutters must be designed at least
for the speed indicated on the power tool.
Disc cutters running at excessive speed can fly
apart and cause injuries .
■
Always use the blade guard.
A blade guard protects the user against parts of
the milling disc which have broken off and also
against unintentional contact with the disc .
■
Always wear a dust mask when using the appli-
ance!
■
Do not use blunt or damaged disc milling
blades!
■
Check that the blade guard return system works
correctly before every use!
Safety guidelines for battery chargers
This appliance may be used by
■
children aged 8 years and
above and by persons with limited
physical, sensory or mental
capabilities or lack of experience
and knowledge, provided that
they are under supervision or
have been told how to use the
appliance safely and are aware
of the potential risks . Do not allow
children to play with the appli-
ance . Cleaning and user mainte-
nance tasks may not be carried
out by children unless they are
supervised .
To avoid potential risks, damaged
■
power cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person .
■
6
│
GB │ IE
The charger is suitable for indoor use only .
WARNING!
■
To avoid potential risks, damaged power
cables should be replaced by the manufactur-
er, their customer service department or a
similarly qualified person .
ATTENTION!
♦
This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3/PAP 20 B1/PAP 20 B3/
PAPS 204 A1/PAPS 208 A1 .
WARNING!
Always wear safety goggles.
WARNING!
Always wear a dust mask.
Before use
Charging the battery pack
(see fig . A)
CAUTION!
►
Always disconnect the mains plug before re-
moving the battery pack 5 from or inserting
it into the charger .
NOTE
►
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level
is between 50% and 80% . The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C .
♦
Insert the battery pack 5 into the high-speed
charger 8 .
♦
Plug the mains plug into the mains power
socket . The red control LED 9 lights up
PFDFA 20-Li A1
Publicidad
