Best WPP1 Serie Manual De Instrucciones página 6

5. INSTALL UPPER FLUE MOUNTING BRACKET
NOTE: The upper flue mounting bracket is taped inside the
hood, but the mounting bracket screws are in the parts
bag of the hood.
Center the upper flue mounting bracket with the center line drawn in
the previous step and place it flush with the ceiling.
Use the upper flue mounting bracket as a template to mark the
position of the screws.
Secure the upper flue bracket to the wall using 3 no. 8 x 1½" screws
and wall anchors if needed.
Ensure that the bracket is tight against the wall.
6. REMOVE HI-FLOW BAFFLE FILTERS
Rest the range hood on a protected surface and remove the tape from the filters. Remove the filters from the range hood by pushing them
towards the nose of the hood and rotate downwards. Remove the parts bag and the hood mounting bracket from inside the hood and set
these parts aside.
Keep tapes (2) holding the grease rail in place until hood is installed on the wall.
c
eiling
3 X
HD1531
CAUTION
g
rease rail
HD1543
6
C L
3/16" *
* for drywall anchor
only