Toshiba REGZA RV55 DIGITAL Serie Manual Del Usuario página 27

MPEG NR – Noise Reduction
When watching a DVD the compression may cause some words
or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by smoothing
out the edges.
a
Select MPEG NR from the PICTURE menu. Use
c
to select a setting to suit your preference.
MPEG NR
DNR
Back
MENU EXIT
DNR – Digital Noise Reduction
DNR enables you to 'soften' the screen representation of a
weak signal to reduce the noise effect.
a
Select DNR from the PICTURE menu.
b
C c
Use or to select between Low, Middle, High,
Auto. and Off. The differences may not always be
noticeable (for the best result use lower settings as
picture quality can be lost if the setting is too high).
Automatic format (Widescreen)
When this television receives a true Widescreen picture and
Auto format is On, it will automatically be displayed in
Widescreen format, irrespective of the television's previous
setting.
a
M
C c
Press and or
FUNCTION
Teletext
Panel lock
Auto format
4:3 stretch
Blue screen
Side panel
Back
MENU EXIT
b
b
Press to highlight Auto format, then
select On or Off.
C
PICTURE PICTURE
2/2
Low
Auto.
Watch TV
to select the FUNCTION menu.
Auto.
Off
On
Off
On
1
Watch TV
C c
or
When 4:3 stretch is activated the size switching system changes
4:3 programs into a full screen picture.
a
In the FUNCTION menu press
stretch.
or
b
C
Press or
When Blue screen is selected the screen will turn blue and the
sound will be muted when no signal is received.
a
In the FUNCTION menu press
screen.
b
C
Press or
Side panel adjustment
The Side panel feature lightens or darkens the band each side
of the screen when in 4:3 or 14:9 format. This helps prevent
image retention of the band and can also make viewing in
bright or dark conditions more comfortable.
a
In the FUNCTION menu press
highlighted.
b
C
Press or
This feature is used to hold a still image on the screen.
a
r
Press
again to cancel.
Panel lock
Panel lock disables the buttons on the television. All buttons on
the remote control can still be used.
a
From the FUNCTION menu select Panel lock and
choose On or Off using
When Panel lock is On, a reminder will appear when the
buttons on the television are pressed. If the standby button
is pressed the television will switch off and can only be
brought out of standby by using the remote control.
to
27
CONTROLS AND FEATURES
4:3 stretch
b
to highlight 4:3
c
to select On or Off.
Blue screen
b
to highlight Blue
c
to select On or Off.
b
until Side panel is
c
to adjust.
Picture still
to hold an image on the screen, press
C c
or .
r