Toshiba REGZA RV55 DIGITAL Serie Manual Del Usuario página 38

CONTROLS AND FEATURES
NOTE:
• These functions depend on the device connected.
• If you select the REGZA-LINK input source from the popup
window, some REGZA-LINK devices may automatically turn
on.
• When the television is switched on it will take a few minutes
for the REGZA-LINK icon to appear in the list, when an HDMI
cable is removed it will take a few minutes for the icon to
disappear.
• If the HDMI cable from connected equipment is changed
Enable REGZA-LINK in the REGZA-LINK setup menu may
need to be reset to On.
• If you change HDMI lead to connect device or HDMI device
setting, reset Enable REGZA-LINK item on the REGZA-
LINK setup menu from Off to On.
REGZA-LINK playback device control
With REGZA-LINK mode on your televisions remote control,
you can control the connected REGZA-LINK playback device
you are watching.
To control the REGZA-LINK input source first select the
equipment with REGZA-LINK input source selection, then
switch the mode on the remote control to REGZA-LINK and
press any buttons.
Device
mode switch
See page 6 for details on available remote control key
functions.
NOTE: The available functions depend on the equipment
connected. Not all the remote control keys may be available.
Please refer to the operation manual for each piece of
equipment connected.
REGZA-LINK one touch play
When connected equipment is switched on REGZA-LINK will
automatically detect the television through the input selection.
If the television is in standby it will be switched on
automatically.
These functions enable or disable can set on the REGZA-LINK
setup (see page 37).
NOTE:
• Even if the equipment is showing a menu the television may
automatically show the input source.
• This feature depends on the connected equipment and
television state.
REGZA-LINK system standby
If the television is turned off (standby mode), the television will
send a message to turn off (standby mode) all of the REGZA-
LINK devices connected to the television.
These functions enable or disable can set on the REGZA-LINK
setup (see page 37).
NOTE: This feature depends on the connected equipment and
television state.
REGZA-LINK system audio control
With your television's remote control, you can adjust or mute
the sound volume of the speakers connected to the television
via an AV amplifier. First, set the remote control mode switch
to REGZA-LINK.
a
Set the Speaker Preference to Amplifier in the
REGZA-LINK menu.
b
Confirm that a connected REGZA-LINK device (such as
DVD player, etc) is selected for the AV amplifier input
source.
NOTE:
• These functions depend on the device connected.
• When you turn on the AV amplifier, change its input source,
or adjust the sound volume, the sound will be output from
the AV amplifier's speakers even if TV Speakers has been
selected. Turn the television off and on again to output the
sound from the TV Speakers.
• This feature may not work if the AV amplifier is operated.
REGZA-LINK PC link
This feature automatically adjusts the suitable widescreen
formats and picture preferences, when connected to a REGZA-
LINK PC.
NOTE: This feature depends on the connected equipment
state.
38