Skil 3335-01 Instrucciones De Funcionamiento Y Seguridad página 12

SM 2610957121 05-08 6/5/08
Sawdust collection port (Fig. 10 and 11)
This scroll saw allows a hose or vacuum accessory (not
provided) to be connected to the dust chute (1).
If excessive sawdust buildup occurs inside the base,
use a wet/dry vacuum cleaner or manually remove saw-
dust by removing the screws (2) and metal plate on the
left side of the saw. Reattach the metal plate and screws
before starting the saw. This will keep your saw cutting
efficiently.
Blade selection (Fig. 12)
This scroll saw accepts both both pin-end and plain-end
5" length blades, with a wide variety of blade thickness-
es and widths. The type of material and intricacies of
cutting operations will determine the number of teeth per
inch. Always select the narrowest blades for intricate
(tight radius and curves) curve cutting and the widest
blades for straight and large curve cutting operations.
The following table represents suggestions for various
materials. When purchasing blades, refer to the back of
the package for best use of blades on various materials.
Use this table as an example, but practice and your own
personal preference will be the best selection method.
When choosing a blade, use very fine, narrow blades to
scroll cut in thin wood 1/4" thick or less.
Use wider blades for thicker materials but this will
reduce the ability to cut tight curves.
Note: Thinner blades will have more possibilities for
blade deflection when cutting angles are not perpendic-
ular to the table.
Teeth/ Blade
Inch Width
TPI inch
10-15 0.110
15-28 0.055-0.110 0.010-0.018 800-1700 to 1-1/2" wood, soft
30-48 0.024-0.041 0.012-0.019
7:35 AM Page 12
Assembly and adjustments
Blade Blade/
Thickness SPM Material Cut
inch
Medium turns on
0.018 500-1200 1/4" to 1-3/4" wood,
soft metal, hardwood
Small turns on 1/8"
metal, hardwood
Non-ferrous
Varies metals/hardwoods
using very slow speeds
1
10 - 15 15 - 28
12.
FIG. 10
FIG. 11
2
FIG. 12
30 - 48