AVer MD330U Serie Manual Del Usuario página 39

Login
Language
Reset
System Reboot
Status OSD
Power Up to Preset
Power Off to Preset
Setting
USB Function
Help Us Improve
Trigger OSD
Camera Selector
System Log Download
Change Cable
The default username/password is admin/admin. To change the
username/password, enter the new username/password and click
Change.
Change the web interface language.
Reset the camera to factory default settings.
Restart your camera.
Enable to display preset status on the HDMI output during functions
such as saving, loading and canceling presets.
When enabled, the camera will move to the defined position after
powering on.
 Click the toggle to turn on > enter a preset number > click Save.
 Make sure the preset number has been defined before enabling
this function.
When enabled, the camera will move to the defined position before
powering off.
 Click the toggle to turn on > enter a preset number > click Save.
 Make sure the preset number has been defined before enabling
this function.
Import or export your camera settings.
Select UVC or Mass Storage.
 UVC: Stream video over USB.
 Mass Storage: Access the inserted microSD card via USB
connection.
1. Connect the camera to a computer using the included USB
3.0 Type-B to Type-A cable.
2. Make sure a microSD card has been inserted in the slot.
3. On the web interface, go to System > USB Function > select
Mass Storage.
Opt-in or opt-out of providing anonymous usage data.
Select how the OSD menu is opened with the remote control.
Assign a number to your camera that corresponds to the Camera
Select buttons on the remote control.
When All Channel is selected, no selection is required on the remote
control to operate your camera
Click to download system log.
Select a lens cable to be installed. When prompted to reboot,
disconnect from power and change the lens cable.
29