Lenco CD-021KDS Manual Del Usuario página 11

PROGRAM PLAY
1. Press the PLAY/PAUSE button (2) and after 8 seconds the STOP button (3).
2. Press the PROG button (6), the following will appear on the display: (00 01) and the 00
will flash.
3. Press the SKIP Forward and Backward (4,5) buttons to select the desired track to be
programmed and press PROG button (6) once to confirm.
4. Repeat the step 3 to program up to 20 tracks.
5. Press PLAY/PAUSE button (2) once to start programmed playback.
6. To cancel programmed playback, press the STOP button (3) once.
ENERGY SAVING
If the unit cannot play for about 30 seconds, it turns off automatically.
3. Specifications
PORTABLE CD/MP3 PLAYER
Plays discs
Anti-shock protection
Output connector
Mains Power
Battery
CD-010/CD-011/CD-012
CD Audio
No
3.5mm earphone socket
4.5V
2 x 1.2V 1000Mah (NI-MH) or 2 x 1.5V AA
11