Publicidad
Idiomas disponibles
Idiomas disponibles
Use
1. Place the appliance on a at, stable and dry surface.
NOTE: Do not move, tilt and/or tip the appliance during operation.
2. The power control switch should be in the " " position.
3. Unwind the power cord completely.
4. Plug the power cord into an electrical outlet.
5. Select one out of the 4 positions on the power selector to start the heater.
6. Set the desired temperature by turning the thermostat control knob.
7. To turn off the appliance, return the 2 selector switches to their initial positions (" " and "
then unplug the appliance.
cleaning
•
IMPORTANT: Always disconnect the power source before cleaning or servicing the appliance.
•
WARNING: Allow the appliance to cool completely before handling and cleaning it.
•
Warning: Never use detergents, chemicals or solvents as they may damage the plastic parts.
•
To avoid any risk of re and/or electric shock, do not spill water or any other liquid into the appliance.
•
Use a soft, dry cloth to remove dust and clean the outer surfaces of the appliance.
•
For a thorough cleaning, you may use a soft cloth slightly moistened with water and a mild detergent
(such as washing-up liquid). Then dry thoroughly with a soft cloth before restarting the appliance.
•
Clean the ventilation grilles of the appliance regularly.
•
Make sure that no water enters the appliance through the ventilation grilles.
•
If you are not going to use the appliance for a long period of time, unplug it from the power outlet.
handling/moving the appliance
•
Always unplug the power cord from the wall socket and allow the appliance to cool down before
handling or moving it.
•
When moving or handling your mobile convection heater, grasp it by the plastic side handles.
•
Always transport the appliance horizontally.
"),
25
V.1.0
Modo de empleo
Publicidad
