Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE COFFEE GRINDER
Before first use
•
Before using the coffee grinder for the first time, wipe the housing and coffee
bean holder with a clean, damp cloth.
•
Clean the ground coffee container and lid with warm soapy water, rinse and
dry.
Grinding coffee beans
1.
Align the protruding part of the coffee bean holder with the groove on the
espresso machine body, and then turn it clockwise to the corresponding
position of the locking arrow. (Note that the device is equipped with a micro
switch, so the coffee bean holder must be installed correctly for the device to
work).
2.
Put a sufficient amount of coffee beans in the coffee bean container. The
maximum amount of coffee beans must not exceed 200 g. You can run the
device continuously for 5 minutes, after which it must pause for 30 minutes).
3.
Close the coffee bean holder lid
4.
Place the ground coffee container (the lid must be closed) onto the designated
location on the body, making sure it is aligned with the ground coffee outlet.
5.
Turn the coffee bean container to set the desired coffee strength. Turning to
the left increases the coffee strength, turning to the right reduces the coffee
strength.
6.
The amount of coffee is determined by the grinding time. The time can be
set on the control panel (+) (-). After confirming your selection, press the Start
button to begin the process. By default, the device is set to 14 seconds.
7.
Level 5 is the most suitable degree of grinding for preparing a cup of espresso
with the espresso machine.
EN
31
Publicidad
