Kohler Oblo K-123B16-SANA-CP Instrucciones De Instalación página 6

2. Install Tubing (Recommended)
NOTE: Tubing (not provided) can be attached to the mounting bracket to route the
cables and the spout tube to the control box. PVC fittings (not provided) are
recommended.
NOTE: Refer to the Specification Sheet to determine the control box installation
location.
Connect a straight tube to the mounting bracket. Verify that the tube is long
enough to reach the control box.
Connect a 90-degree elbow to the end of the tube at the control box installation
location.
Install the plaster guard with the screw.
1561536-2-A
6 Kohler Co.