HOWTOUSE 37
Steam
functions
(cont.)
LG's new steam technology
allows you to inject fabrics with a
swirling
jet of hot steam to refresh clothes, reduce static, and
make ironing
easier.
Simply select the STEAM FRESH
TM
cycle, or you can add a Steam
option
to selected
cycles.
Using the STEAM
FRESH
TM
Cycle
STEAM FRESH
TM
uses the power of steam alone to quickly
reduce
wrinkles
and odor in fabrics.
It brings new life to wrinkled
clothes
that have been stored for an extended
time and makes heavily
wrinkled
clothes easier to iron. STEAM FRESH
TM
can also be used
to help reduce odors in fabrics.
@NOTE
, REDUCE STATIC or EASY IRON options
can also be used during
the STEAM FRESH
TM
cycle.
, Depending
on the load (quantity
of items), you may change the
amount
of time for the cycle by pressing the MORE TIME or LESS
TIME button.The
display will show 3, 5, or bl 9.3
means 3 or
fewer items, 5 is for 4 or 5 items, and bl _ indicates
a large load
such as a comforter.
To Usethe STEAMFRESH
TM
Cycle:
1. Turn on the dryer and turn the cycle selector
knob to select the
STEAM FRESH _ cycle.
2.To add an option function,
select REDUCE STATIC, EASY IRON, or
WRINKLE CARE.
3. Depending
on the load (quantity
of items), steam time can be
changed
by pressing the MORETIME or LESSTIME buttons.
4. Press START/PAUSE button
to start the cycle.
Using the Steam Options:
The REDUCE STATIC option
injects steam late in the drying cycle
to reduce the static electricity
caused by dry fabrics rubbing
together.
Change the amount
of time for the cycle by pressing the
MORETIME or LESS TIME button,
depending
on the load (quantity
of items). The display will show the recommended
number
of
items, such as 7, 9, 11,14, 16, or 18.
The EASY IRON option
provides
uniform,
properly
dampened
fabrics for ironing, which can save time and make ironing easier.
Change the amount
of time for the cycle by pressing
the MORE
TIME or LESS TIME button,
depending
on the load (quantity
of
items). The display will show the recommended
number of items,
such as 1,2, 3, 4, or 5.
@ NOTE
. When Sensor Dry is selected with the REDUCE STATIC option,
a
Dry level of Les or DAMP cannot
be selected.
,The REDUCE STATIC or EASY IRON option
may also be selected
during TIME DRY cycles.
, After the Steam option
is selected
in TIME DRY, the MORE TIME
or LESS TIME buttons
will change the steam time ONLY.
• After pressing START/PAUSE, the MORETIME or LESSTIME
buttons
will be disabled.
Using the STEAM SANITARY
TM
cycle
TM
New STEAM SANITARY
cycle is ideal for sanitizing
non washable
items quickly
and easily using the power of steam alone.
Recommend
to use this cycle for cotton
and polyester
material.
(Do NOT use for urethane
foam, down feathers
or delicates
items)
To Add STEAM to a Standard Cycle:
1. Turn on the dryer and turn the cycle selector
knob to select the
desired cycle.
2. Use the cycle setting
buttons
to adjust the settings
for that
cycle.
3. Press the Steam option
button
for the Steam option
you would
like to add. Then adjust for the load size using the MORE TIME
or LESSTIME buttons.
4. Press START/PAUSE button
to start the cycle.