ENAR EBRO Serie Manual De Operación página 42

2.4 SERVICE SAFETY
Service
training
Precautions
en
Personal
Protective
Equipment
(PPE)
Machine
modifications
8 EBRO
EBRO 2C, EBRO 3C, EBRO 3D
Before servicing or maintaining the machine:
•
Read and understand the instructions contained in all manuals delivered with the
machine.
•
Familiarize yourself with the location and proper use of all controls and safety
devices.
•
Only trained personnel should troubleshoot or repair problems occurring with the
machine.
•
Contact ENAR for additional training if necessary.
When servicing or maintaining this machine:
•
Do not allow improperly trained people to service or maintain the machine.
Personnel servicing or maintaining the machine must be familiar with the
associated potential risks and hazards.
Follow the precautions below when servicing or maintaining the machine:
•
Read and understand the service procedures before performing any service to the
machine.
•
All adjustments and repairs must be completed before operation. Do not oper- ate
the machine with a known problem or deficiency.
•
All repairs and adjustments shall be completed by a qualified technician.
•
Turn off the machine before performing maintenance or making repairs.
Wear the following Personal Protective Equipment (PPE) while servicing or maintaining
this machine:
•
Close-fitting work clothes that do not hinder movement
•
Safety glasses with side shields
•
Hearing protection
•
Safety-toed footwear.
In addition, before servicing or maintaining the machine:
•
Tie back long hair.
•
Remove all jewelry (including rings).
When servicing or maintaining the machine:
•
Use only accessories/attachments that are approved by ENAR.
When servicing or maintaining the machine:
•
Do not defeat safety devices.
•
Do not modify the machine without the express written approval of ENAR.
WATER PUMP