ENAR EBRO Serie Manual De Operación página 43

Replacing parts
and labels
Lifting and
transporting
Cleaning
WATER PUMP
•
Replace worn or damaged components.
•
Replace all missing and hard-to-read labels.
•
When replacing electrical components, use components that are identical in rat-
ing and performance to the original components.
•
When replacement parts are required for this machine, use only ENAR
replacement parts or those parts equivalent to the original in all types of
specifications, such as physical dimensions, type, strength, and material.
When lifting the machine:
•
Make sure slings, chains, hooks, ramps, jacks, and other types of lifting devices
are attached securely and have enough weight-bearing capacity to lift or hold the
machine safely. See chapter Technical Data.
•
Remain aware of the location of other people when lifting the machine.
•
Make sure the transporting vehicle has sufficient load capacity and platform size
to safely transport the machine. See chapter Technical Data.
To reduce the possibility of injury:
•
Do not stand under the machine while it is being lifted or moved.
•
Do not get onto the machine while it is being lifted or moved.
When cleaning and servicing the machine:
•
Keep the machine clean and free of debris such as leaves, paper, cartons, etc.
•
Keep the labels legible.
When cleaning the machine:
•
Do not clean the machine while it is running.
•
Never use gasoline or other types of fuels or flammable solvents to clean the
machine. Fumes from fuels and solvents can become explosive.
EBRO 2C, EBRO 3C, EBRO 3D
en
EBRO 9