Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
• If parts of the machine are damaged, do not use
the machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact the
service center.
1.
Open the package.
2.
Read the documentation provided in the box.
3.
Remove all the unassembled parts from the box.
4.
Remove the machine from the box.
5.
Discard the box and packing material in
compliance with local regulations.
10.2
INSTALL THE TRIGGER HANDLE
1.
Move the trigger handle (11) onto the connecting
tube (6).
2.
Use knob to tighten the screw.
English
11
6
9
10.3
INSTALL THE CONNECTING TUBE
12
1.
Align the rib (12) on the connecting tube with the
slot (13) in the flexible tube.
2.
Put the end of the connecting tube (6) into the
flexible tube.
3.
Push the connecting tube into the flexible tube.
4.
Put the hose clamp (14) around the flexible tube.
5.
Install and tighten the available screw into the
hose clamp (14).
10.4
INSTALL THE REAR BLOWER TUBE
5
13
14
6
EN
Publicidad
