Leviton VERSI-DUCT 491RU-HFR Instrucciones De Instalación

WARNINGS:
• TO AVOID DEATH OR SERIOUS PERSONAL INJURY: DO NOT push objects of any kind into this product through openings, as they may touch
dangerous voltages.
• DO NOT touch uninsulated wires or terminals unless the wiring has been disconnected at the network interface.
• Read and understand all instructions. Follow all warnings and instructions marked on the product.
• DO NOT use this product near water - e.g., near a tub, wash basin, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.
DESCRIPTION
Leviton's VERSI-DUCT Slotted Duct System is designed to mount on standard 19" equipment
racks. Two vertical 40" ducts, or one 80" duct (comprised of two 40" ducts) install easily and
help organize and manage cable. The Horizontal and Vertical Slotted Ducts come with
cable-concealing covers and an assortment of accessories.
VERTICAL SLOTTED DUCT
Mounting the Vertical Slotted Duct (4940L-VFR, 4940L-VFO, 4980L-VFR, 4980L-VFO)
1. Align the Vertical Slotted Duct's mounting brackets with the equipment rack (Figure 1).
2. To secure the Vertical Slotted Duct in place, push the supplied #12 screws through the
mounting bracket and screw into the equipment rack.
3. When assembling the 80" duct, carefully align the connecting tabs (Figure 2).
4. To install the Vertical Slotted Duct's cover(s), fit the cover over one side of duct fingers and
rotate the cover to the other side until it snaps into place.
NOTE: The duct fingers can be bent outward and snapped off to more easily run cables
from the vertical to the horizontal duct.
ACCESSORIES
Mounting Bracket (49265-BKT)
The Mounting Bracket is designed to assist in attaching the vertical duct to an adjacent equipment
rack. The Mounting Bracket Kit comes with #8 screws.
Install: For each mounting bracket, use two screws to secure the mounting bracket to the
bracket already riveted in the slotted duct (Figure 3).
Slack Loop Storage Organizer (49265-SL1, 49265-SL2)
The Slack Loop Storage Organizer manages and stores excess cable for future use. The
Slack Loop Storage Organizer is moveable and can be installed to accommodate different size
slack loops.
Install: Slide the Slack Loop Storage Organizer over the fingers of the Vertical Slotted Duct
(Figure 4).
NOTE: Bend radius and Slack Loop Storage Organizer are compliant with
ANSI/TIA/EIA standards.
Cable Retainer (49265-WR1 - Used with Vertical and Horizontal Ducts)
The Cable Retainer is designed to hold cable within the slotted duct. The Cable Retainer has
four notches, so it can be snapped off to accommodate different size slotted ducts.
Install: Slide the Cable Retainer over the duct finger until it snaps into place (Figure 5).
Duct Cover Hinge (49265-HNG - Used with Vertical and Horizontal Ducts)
The Duct Cover Hinge is designed to easily open and close duct cover for increased protection
and easy access.
Install: Attach duct cover first. Snap hinge between slotted duct fingers and attach to one side
of duct cover (Figure 6).
NOTE: Use a minimum of two hinges per cover.
LEVITON, and LEVITON Block Design are trademarks of Leviton Manufacturing Co., Inc. and are registered trademarks in many countries throughout the world.
VERSI-DUCT is a trademark of Leviton Manufacturing Co., Inc. and is registered in many countries including China, Mexico and United States.
Patents covering this product, if any, can be found on Leviton.com/patents.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada ULC to the attention of the Quality Assurance Department, 165 Hymus Blvd,
Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1800-405-5320.
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for two years from the
purchase date. Leviton's only obligation is to correct such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal
of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not
in accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the
duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to two years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage
to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
For Technical Assistance Call: 1-800-824-3005 (USA Only) or 1-800-405-5320 (Canada Only) www.leviton.com
VERSI-DUCT
Cat. Nos. 491RU-HFR, 491RU-HFO, 492RU-HFR, 492RU-HFO, 4940L-VFR, 4940L-VFO, 4980L-VFR, 4980L-VFO
49265-DC1, 49265-DC2, 49265-WR1, 49265-HNG, 49265-BKT, 49265-SL1, 49265-SL2
INSTALLATION INSTRUCTIONS
HORIZONTAL SLOTTED DUCT
Mounting the Horizontal Slotted Duct (491RU-HFO, 492RU-HFO, 491RU-HFR, 492RU-HFR)
1. Using standard rack and #12 mounting screws, mount the duct to the front of the rack.
2. To install the Horizontal Slotted Duct cover, align the left and right side of the cover with the
slotted duct. Fit the cover over the top of duct fingers. Pushdown and rotate the cover to the
other side until it snaps into place.
Installing Bend Radius Compliant Cable Router (Included with Horizontal VERSI-DUCT)
The Bend Radius Compliant Cable Router is used to transition patch cords entering and exiting
the Horizontal Slotted Duct.
Install: Snap the Bend Radius Compliant Cable Router onto the fingers of the Horizontal Slotted
Duct (Figure 7).
NOTE: The Bend Radius Compliant Cable Router is compliant with ANSI/TIA bend radius standards.
ACCESSORIES
Horizontal Designer Covers (49265-DC1, 49265-DC2)
Optional gray snap-on covers provide a premium appearance.
Install: Fit the cover over top side of duct fingers. Push down and rotate the cover to the other
side until it snaps into place.
Cable Retainer (49265-WR1 - Used with Vertical and Horizontal Ducts)
The Cable Retainer is designed to hold cable within the slotted duct. The Cable Retainer has
four notches, so it can be snapped off to accommodate different size slotted ducts.
Install: Slide the Cable Retainer over the duct finger until it snaps into place (Figure 4).
Duct Cover Hinge (49265-HNG - Used with Vertical and Horizontal Ducts)
The Duct Cover Hinge is designed to easily open and close duct cover for increased protection and
easy access.
Install: Attach duct cover first. Snap hinge between slotted duct fingers and attach to one side of
duct cover (Figure 5).
NOTE: Use a minimum of two hinges per cover.
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS
® SLOTTED DUCT SYSTEM
WARNINGS:
• Never install communications wiring or components during a lightning storm.
• Never install communications components in wet locations unless the components are designed specifically for use in wet locations.
• Use caution when installing or modifying communications wiring or components.
• SAVE THESE INSTRUCTIONS.
1
4
5
2 6
7
3
PK-93096-10-02-5G
ENGLISH