THOMSON WS400DUO Manual De Instrucciones página 14

Remote control
1. Power button
2. Bluetooth mode
3. Auxiliary mode
4. Volume up
5. Back to previous track (BT mode)
6. Volume down
7. Mute
8. Play/Pause
9. Skip to next track (BT mode)
Automatic standby
When you are playing audio media from a connected accessory, the speaker automatically
goes into standby if:
- You don't press any buttons for 10 minutes:
- No sound data is transmitted from a connected device for 10 minutes.
Features and connections
Using the auxiliary RCA input
1. Connect an audio input cable (not included) to the audio input on
the speaker and an audio source.
2. Press the button on the remote control to turn on the device.
3. Press the AUX button on the remote control to switch to AUX mode.
4. Use the controls on the connected audio device to start playing music through the
connected speaker.
Using Bluetooth
Please note: the maximum connection distance is approximately 10 m. Place your Bluetooth
speaker as close as possible to this appliance to prevent the connection being disrupted.
Make sure your mobile phone is Bluetooth-compatible. Some pairing steps may vary by
mobile phone. Please consult your phone's user guide for more information. The main pairing
steps are as follows:
1. Keep the WS400DUO speaker and phone 1 metre or less apart during pairing.
2. Press the button on the remote control to turn on the device.
3. Press the BT button on the remote control to switch to BT mode.
4. Activate your phone's Bluetooth function and search for Bluetooth devices. When the
search is complete, select "WS400DUO" from the list of Bluetooth devices.
5. If prompted, enter the password or PIN code: "0000" and press "Yes" or "Confirm".
6. Once paired successfully, select "WS400DUO" from the list of Bluetooth devices and
press "Connect"
7. Press  to play/pause the music.
1.
2.
3.
4.
5.
6.
- EN 14 -
MUTE
BT
AUX
VOL+
PREV NEXT
VOL-
7.
8.
9.