Linea 2000 DOMO DO7118S Manual De Instrucciones página 33

I PRODUCT-SPECIFIC WARNINGS
· The iron must be used and rested on a flat, stable surface and
resistant to heat and hot steam.
· The iron is not to be used if it has been dropped, if there are
visible signs of damage or if it is leaking. Do not operate this
appliance with a damaged cord or plug or in the event the
appliance malfunctions or has been damaged in any manner.
Return the appliance to the DOMO Service Department
or its service agent for examination, repair, or electrical or
mechanical adjustment. Do not try to repair the appliance
yourself.
The surface(s) marked with this symbol are liable
to get hot during use. It is advised not to touch the
surfaces of the appliance other than the handles to
avoid burns.
· Do not move the iron while in use or when still hot. Allow to
cool before moving the iron or before maintenance.
· Do not fill the water reservoir with any other liquid than water.
· Make sure the appliance has cooled down before opening the
boiler for cleaning. Make sure the bolt of the boiler is correctly
and well fixed onto the appliance after maintenance.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
PARTS
1. Filling opening
2. Water tank
3. Temperature indication light
4. Cleaning button with indicator light CALC CLEAN
5. On/off button
6. Steam release button
7. Temperature dial
8. Soleplate
9. Thermal insulation pads
10. Cord storage
11. Iron lock button
www.domo-elektro.be
1
DO7118S
33