Publicidad
Idiomas disponibles
Idiomas disponibles
3
4
BEFORE THE FIRST USE
·
Remove any stickers or protective foil from the soleplate.
·
Heat up the iron until the maximum temperature and iron on a damp cloth during a couple of minutes
to remove any possible residues from the soleplate.
CAUTION:
·
Appliances are tested following production. It is thus perfectly normal if droplets of condensation have
formed in the water tank.
·
During the first use it is normal that a specific odour escapes from the appliance. This odour will
disappear after a while.
·
Some particles may come out of the soleplate during the first use. This is normal. The particles are
harmless and will disappear after a while.
·
When turning on the appliance, the steam generator may produce a pumping sound. This is normal.
This sound indicates that water is pumped into the steam generator.
·
While the soleplate is heating up, some steam will be released automatically. This is also normal and
will last for about 3 seconds.
USE
This steam generator offers 2 options: dry ironing or steam ironing. Follow the instructions below. Also
carefully read the ironing tips at the end of this section before using the appliance.
DRY IRONING
1.
Place the iron on the thermal insulation pads of the steam
generator.
2.
Put the plug into the outlet and press the on/off button. The
temperature indicator light will start to flash.
3.
Select the desired temperature with the temperature dial,
according to the kind of fabric that needs to be ironed. The
appliance will produce an audio signal, the temperature indicator
light will start to flash and the iron will start to heat up.
4.
When the temperature indication light stays on, the selected
temperature has been reached. You can now start ironing.
34
DO7118S
5
7
2
11
6
8
9
10
Publicidad
