Changing The Pin Code - Topcom Butler 4056 Manual De Usuario

Butler 4056/4056C
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• KEY LOCK' appears on the display.
• Press the Programming key
• The current status of the keypad appears on the display:
- 'LOCK': the keypad is locked
- 'UNLOCK': the keypad is not locked
• Press the Up or Down key
• Press the Programming key
4.20 TURNING KEY CLICK ON/OFF
You can set the telephone to make a sound whenever you press a key.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• The current status appears on the display:
- 'CLICK ON': turn on key click
- 'CLICK OFF': turn off key click
• Press the Up or Down key
• Press the Programming key
4.21 THE R KEY (FLASH)
Press the Flash key 'R' to use certain services such as "call waiting" (if your telephone
company offers this feature); or to transfer calls if you use a telephone exchange (PABX). The
Flash key 'R' is a brief interruption of the line. You can set the flash time to 100ms or 300ms.
This is set to 100ms by default! However, if your system requires a longer flash time, do the
following:
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
- SHORT = 100ms
- LONG = 300ms
• Press the Programming key

4.22 CHANGING THE PIN CODE

Certain functions are only available if you know the PIN code of the telephone.
The PIN code has 4 digits. The default PIN code setting is '0000'. If you would like to change
the default PIN code and set your own secret code, do the following:
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
Butler 4056/4056C
.
repeatedly until 'KEY SETUP' appears on the display.
.
.
to make your selection.
to confirm your selection.
.
repeatedly until 'KEY SETUP' appears on the display.
.
repeatedly until 'KEY CLICK' appears on the display.
.
to make your selection.
to confirm your selection.
.
repeatedly until 'SETTING' appears on the display
.
repeatedly until 'RECALL' appears on the display.
.
repeatedly to select the flash time:
to confirm your selection.
.
repeatedly until 'SETTING' appears on the display.
.
17