Publicidad
Idiomas disponibles
Idiomas disponibles
a)
Unplug the unit before making adjustments, changing accessories, or putting
it away. This precaution reduces the risk of accidental start-up.
b)
Keep unused equipment out of the reach of children and out of the reach of
anyone unfamiliar with the unit or this instruction manual. These units is
dangerous in the hands of inexperienced users.
c)
Keep the unit in good working condition. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the unit). If damaged,
have the unit repaired before use.
d)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
e)
To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
f)
When transporting or moving the unit from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the unit is used.
g)
Avoid situations in which the machine stops under heavy loads during
operation. This can cause overheating of the drive elements and consequent
damage to the equipment.
h)
Do not touch any moving parts or accessories unless the unit is unplugged.
i)
Do not move, shift, or rotate the machine while in operation.
j)
Do not leave the unit switched on unattended.
k)
Clean the unit regularly to prevent permanent dirt build-up.
l)
The unit is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
m) Do not start up an empty machine.
n)
Do not tamper with the unit to alter its performance or design.
o)
Keep the unit away from sources of fire and heat.
p)
Do not overload the unit.
q)
Inappropriate use of the product, such as sitting on the worktop, may result
in product damage and/or personal injury. Sitting on the desk top is
prohibited to prevent serious injury.
r)
Do not move or lie under the desk structure during adjustment. Do not sit or
stand on the desk frame. Use extreme caution when making adjustments.
s)
Check regularly whether the adjustment mechanism of the desk is working
properly and remove any obstacles which may block the smooth adjustment
of the desk.
t)
Make sure that cables, connections and plugs do not interfere with the use of
the product.
u)
When adjusting the height of the desk, make sure that the lead wires are of
sufficient length. The cables and connections that are too short may hinder
height adjustment or damage other equipment.
Publicidad
