Publicidad
Idiomas disponibles
Idiomas disponibles
4. INITIAL CONFIGURATION / 5. OPERATION
EN
Parameters: ATTENTION, this section could modify the factory configuration of the
storage. Only a specialized technician should enter this section, the user should not enter
or modify the parameters to avoid improper operation of the product.
Set defaults: select YES if you want to set the current configuration of the storage (the last
configuration performed) as default values.
Reset: in this menu you can reset the device to return to the default values and disconnect it
from the internet.
Version: Information on the current version of the electronics, it is possible to need this
information in case of a failure or breakdown.
5. OPERATION
The storage is turned on or off by pressing the MODE button and has 4 modes of operation;
Standby Mode: In this mode the device is off.
•
Fixed Temperature Mode: In this mode, the device works at a fixed temperature setting
•
(18ºC). This temperature can be modified with the +/- keys, wait until the temperature stops
flashing (without pressing any button).
Weekly programming mode: In this mode, the device follows the temperature program
•
configured in the PROGRAMMING section.
After starting the device, a home screen appears that can be the Weekly Programming or the
Fixed Temperature screen, only one of the two modes can be active.
Boost function: This mode can be used to change the temperature momentarily. You can
•
enter this option having configured any of the previous modes (fixed temperature mode
or weekly programming). To activate it, from the main screen press the +/- button, press
CONF to select the temperature and set the time that the active Boost mode will last. Press
MODE to confirm.
If the previous mode was Fixed Temp, the temporary setting can be; 0h to 5h, all day or
forever. If the previous mode was Schedule, by pressing the Set button, you can define the
time during which the change is applied. The temporary setting is selected with the +/- key
and can be: 0h to 5h or all day. Accept with MODE. To deactivate the Boost function and
return to the previous mode, press the MODE button.
Key lock: When this function is active, the keys do not work. To activate it, press the + and -
buttons for 5s. Do the same to disable it.
30
ECOJOULE
Publicidad
