Ferm TSM1037 Traducción Del Manual Original página 4

20V CORDLESS COMBI KIT
SOLDERING IRON
TSM1037/SGM1026
Thank you for buying this FERM product. By
doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by FERM are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings,
the additional safety warnings and the
instructions. Failure to follow the safety
warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the
safety warnings and the instructions for future
reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of
nonobservance of the instructions in this
manual.
Risk of electric shock.
Class III appliance.
Caution: hot surface.
Wear ear and eye protection.
Do not dispose of the product in
unsuitable containers.
4
The product is in accordance with the
applicable safety standards in the
European directives.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING!
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
WARNING! Risk of fire! When putting the
soldering iron down, make sure that the
hot tip does not come into contact with
combustible materials. Do not leave the
device unattended while it is hot. Allow it
to cool down before you store it away.
WARNING! The soldering tip reaches
temperatures of about 450°C. Touching
the metal parts can cause severe burns.
WARNING! The device must always be
placed on a non-combustible surface
when it is not in use. There is a potential
fire hazard.
WARNING! This tool must be placed
on its stand when not in use.
Save all warnings and instructions for future
reference. The term "power tool" in the warnings
refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) Product use and safety
a) Do not leave the soldering iron unattended
when switched on. When in use, store the
machine in the provided stand.
b) Always fasten the nut tightly when
attaching the tip. This ensures a good
conduction of the heat.
c) Always turn on the device before it comes
into contact with the material that is to be
worked on.
d) Vapours which are harmful to health are
produced during the soldering process.
Ensure good ventilation or suitable vapour
removal.