Ferm TSM1037 Traducción Del Manual Original página 8

5. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
battery pack from the machine.
Repairs may only be carried out by a qualified
electrician or at a service workshop!
These machines have been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Cleaning
Never use solvents such as petrol, alcohol,
ammonia water, etc. These solvents may damage
the plastic parts.
Do not spray the appliance with water and do
not immerse it in water. Electric shock hazard!
Do not use cleaning agents or solvents.
You may otherwise irreparably damage the
appliance.
• Wipe off the warm soldering tip (1) after use on
a damp sponge.
• Never scrape or file any solder residues off
the soldering tip with hard objects, as this will
damage the soldering tip (1).
ENVIRONMENT
To prevent damage during transport, the appliance
is delivered in a solid packaging which consists
largely of reusable material. Therefore please
make use of options for recycling the packaging.
The crossed-out wheelie bin symbol
means that this product shall not be
disposed of with normal household
waste. Electronic and Electrical
Equipment not included in the selective
sorting process are potentially dangerous
for the environment and human health
due to the presence of hazardous
substances. Please dispose of
responsibly at an approved waste or
recycling facility.
8
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
WARRANTY
FERM products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date
of original purchase. Should the product develop
any failure during this period due to defective
material and/or workmanship then contact your
FERM dealer directly.
The following circumstances are excluded from
this guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers.
• Normal wear and tear.
• The tool has been abused, misused or
improperly maintained.
• Non-original spare parts have been used
This constitutes the sole warranty made by
company either expressed or implied. There are
no other warranties expressed or implied which
extend beyond the face hereof, herein, including the
implied warranties of merchantability and fitness
for a particular purpose. In no event shall FERM be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject
to change. Specifications can be changed
without further notice.