Settings
Network
Select network
Select between Automatic and Manual.
]
Automatic: Automatically searches for the network
and registers the handset to the network. This is
recommended for best service and quality.
]
Manual: All the currently 2G(GSM) and
3G(UMTS) available networks are shown and you
can select one of them for registration. If the
registration of the network has failed, all the
currently available networks are listed again and
you can select any other one for registration.
Network mode
You can set a type of network to search for when
networks are searched in the "Select network" menu.
]
Automatic: Searches all the networks connectable.
]
UMTS: Searches only networks supporting 3G.
]
GSM 900/1800: Searches only networks
supporting GSM 900 MHz and 1800 MHz.
]
GSM 1900: Searches only networks supporting
GSM 1900 MHz.
46
Menu 3.2
(Menu 3.2.1)
(Menu 3.2.2)
Preferred list
(Menu 3.2.3)
If the network is searching automatically, you can add
a preferable network to be connected to. And the
following options are available.
]
Add new: You can add a new network using the
followings.
- Search: You can select one from the network list
stored in the phone.
- Enter new network: You can enter the country
code (MCC) and the network code (MNC) to
add. After setting, press "Done" key.
]
Delete: Deletes the selected network.
]
Move up: Moves the selected network upward.
]
Move down: Moves the selected network
downward.
Packet data conn.
(Menu 3.2.4)
3G is a technology that allows mobile phones to be
used for sending and receiving data over the mobile
network.
3G is a data bearer that enables wireless access to
data network such as the Internet.