Panasonic ES-ALT4B Instrucciones De Funcionamiento página 8

How to clean
• Make sure that the main body is turned off.
1. Wet the system outer foil, put on the hand soap (Fig. 5),
turn on the power, and turn off the power after 20 seconds.
2. Remove the outer foil section.
3. Rinse them with running water. (Fig. 6)
4. Shake up and down several times to remove the water.
5. Wipe off the water with a dry cloth and dry it well.
6. Lubricate the shaver.
1. Apply one drop of lubrication oil to each of the system
outer foils. (Fig. 7)
2. Turn on the power and allow to run it for approximately
5 seconds.
3. Turn off the power and wipe off any excess lubrication
oil from the system outer foil with a soft cloth.
Replacing the system outer foil and
the inner blades
Outer foil section
Remove the outer foil section by pushing the
frame release buttons. (Fig. 8)
Align as illustrated, securely attach the outer
foil section to the head until it clicks. (Fig. 9)
System outer foil (Fig. 10)
• Do not throw away the foil frame.
Press the system outer foil release buttons
and pull down the system outer foil.
8
Align as illustrated, securely attach the system
outer foil to the foil frame until it clicks.
Inner blades (Fig. 11)
Remove the inner blades one at a time.
Insert the inner blades one at a time.
Replacement parts
System outer foil: once every year
Inner blades: once every two years
Replacement part is available at your dealer or Service Centre.
System outer foil and inner blades
System outer foil
Inner blades
Lubrication oil
Troubleshooting
Problem
The power switch does
not turn ON.
Appliance does not operate
even after charging.
WES9013
WES9087
WES9068
WES003P
Action
Unlock the switch lock.
The appliance will not operate
with the AC adaptor connected.
Please use the appliance after it
has been sufficiently charged and
the AC adaptor disconnected.