Publicidad
Idiomas disponibles
Idiomas disponibles
DELIVERY
Customer
Note: If you have purchased this
product without complete assembly and
instruction by your retailer, it is your
responsibility
to:
Read and understand all assembly
instructions
in this manual. If you do
not understand or have difficulty
following the instructions,
contact your
nearest Ariens Dealer for assistance.
NOTE: To locate your nearest Ariens Dealer,
go to www.ariens.com
on the internet.
A
ARNING: Improper assemblyor
adjustments can cause serious
injury.
Before Attempting to Operate Your
Unit:
1. Make sure all assembly has been
properly completed.
2. Understand all Safety Precautions
provided in the manuals.
3. Review control functions and operation
of the unit. Do not operate the unit
unless all controls function as described
in this manual.
4. Review recommended
lubrication,
maintenance
and adjustments.
5. Review Limited Warranty Policy.
6. Fill out a product registration
card and
return the card to the Ariens Company or
go to www.ariens.com.
DISCLAIMER
Ariens reserves the right to discontinue,
change, and improve its products at any time
without notice or obligation to the purchaser.
The descriptions and specifications
contained
in this manual were in effect at printing.
Equipment described within this manual may
be optional. Some illustrations may not be
applicable to your unit.
[,."Y-'1 =1 _ m'd
WARNING: This cutting machine
is capable of amputating
hands
and feet and throwing objects.
Failure to observe the safety
instructions in the manuals and on
decals could result in serious
injury or death.
Slopes are a major factor related
to loss-of-control
and tip-over
accidents. Operation on all slopes
requires extra caution.
Tragic accidents can occur if the
operator is not alert to the
presence of children. Never
assume that children will remain
where you last saw them.
Gasoline is extremely flammable
and the vapors are explosive,
handle with care.
Disengage attachment,
stop unit
and engine, remove key, engage
parking brake, and allow moving
parts to stop before leaving
operator's position.
SAFETY ALERTS
Look for these symbols to point
A
ut important safety
precautions. They mean:
Attention!
_-_
Personal Safety Is
Involved!
Become Alert!
Obey The Message!
The safety alert symbol is used in decals and
with this manual. Understand the safety
message.
It contains important information
about personal safety.
A
WARNING:
POTENTIALLY
HAZARDOUS
SITUATION!
If not
avoided, COULD RESULT in
death or serious injury.
A
DANGER:
IMMINENTLY
HAZARDOUS
SITUATION!
If not
avoided, WILL RESULT in death
or serious injury.
GB-3
Publicidad
