NAME OFEACHPART
• Remote Control
•
Remote Control Signal.
• Make sure it is not obstructed.
• Maximum distance : 10 m (32.8 ft.).
• Signal received sound.
One short beep or one tongbeep.
•
Notes for Remote Control.
• Do not throw or drop.
• Do not get it wet.
• Certain type of fluorescent lamps may affect
signal reception. Consult your dealer.
[] Signal Transmitter
[] Operation Display
[]
Powerful Mode Operation Button
[]
Room Temperature Setting Button
(serf-illuminating button)
[] Operation Mode Selection Button
[] Economy Mode Operation Button
[] Vertical Airflow Direction Button
[] ON-Timer Button
[] OFF-Timer Button
[]
Reset Point
(Press with fine-tipped object to clear the memory)
[]
OFF/ON Button
(self-illuminating button)
[]
Sleep Mode Operation Button
[] Fan Speed Selection Button
[] Horizontal Airflow Direction Button
[] Timer Set Button
[] Timer Cancellation Button
[] Time-Setting Button
[] Clock Button
[] Remote Control Cover
How to Insert the Batteries
2
1
Slide down the remote control cover completely
to remove IL
2
Insert the batteries
- Be sure the direction is correct
- 12.00 at display - flashing
• Set the current time (CLOCK) immediately to
prevent battery exhaustion.
3
Re-Install the remote control cover by Inserting it
in the side groves and pushing Inward.
•
About the batteries
• Can be used for approximataty one year,
•
Observe the following when replacing the
batteries
• Replace with new batteries of the same type.
• Do not use rechargeeble battedas (Ni-Cd).
• Remove the batteries if the unit is not going to be
used for a long pedod.