Panasonic CS-C18BKP Instrucciones De Funcionamiento página 7

• Setting the Fan Speed
• Press [] to select:-
FAN • - Low Fan Speed
FAN •HI - Medium Fan Speed
FAN ••IDa - High Fan Speed
AUTO
FAN - Automatic Fan Speed
The speed of the indoor fan is adjusted
automatically accordingto the operation.
The indoor fan stopsoccasionally during
cooling operation.
• Setting the Vertical Airflow Direction
• Press [] to select:-
%
/_o Swing up/down automatically.
• Setting the Horizontal Airflow Direction
• Press [] to select:-
Horizontal
Airflow
O{rection
Remote Indoor
Control Unit
_]* Swing left/right automatically.
• Notes
• If the unit is not going to be used for an extended
period of time, tom off the main power supply. If it is
left at the ON position, approximately 2.5 W of
electricity will be used even if the indoor unit has been
turned off with the remote control.
If operation is stopped, then restart immediately, the
unit will resume operation only after 3 minutes
• Operation Details
COOL - Cooling Operation
• To set the room temperature at your preference
coolingcomfort.
AUTO - Automatic Operation
• Sense indoor temperature to select the optimum
mode.
• Temperature is not displayed on the remote control
during AUTO operation.
DRY - Soft Dry Operation
A very gentle Cooling Operation, prior to
dehumiditicetioP,, i t does not tOWerthe room
temperature.
During Soft Dry operation, the indoor fan operates at
Low fan speed.
FAN - Air Circulation OPeration
When the room temperature reaches the set
temperature, operation_ommenoes at Low airflow
volume. It stops when the room temperature drops to
4°F below the set temperature.
(It is useful when using a heater).
• Hi Fen Speed will not operate when using the air
circulation Fan mode.
Dudng Autooperation, Vertical Airflow Direction Louver
will move up or down automatically.