Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
This unit must be serviced by trained and qualified
personnel only. Service by unqualified personnel may lead
to electric shock or burn.
Symptom
Food well not hot enough.
Food well too hot.
No heat.
Form No. RHWCEM-0910
Probable Cause
Temperature setting too low.
Wrong pot installed in unit (RHW models).
Heating element not working.
Temperature Control not working properly.
Voltage supplied is incorrect.
Temperature setting too high.
Temperature Control not working properly.
Voltage supplied is incorrect.
Unit turned off.
Circuit breaker tripped.
Temperature Control not working properly.
Heating element not working.
TROUBLESHOOTING GUIDE
ELECTRIC SHOCk HAzARD: Turn power switch OFF,
unplug power cord, and allow unit to cool before
performing any maintenance or cleaning.
Use TEMP button to change to higher
temperature setting.
Use specially-designed round pots for RHW
models from Hatco only. Other pots may not
provide the proper contact between the unit
and the pot.
Contact Authorized Service Agent or Hatco for
assistance.
Contact Authorized Service Agent or Hatco for
assistance.
Verify correct voltage is supplied to unit. Low
supply voltage will cause improper heating.
Use TEMP button to change to lower
temperature setting.
Contact Authorized Service Agent or Hatco for
assistance.
Verify correct voltage is supplied to unit. High
supply voltage will cause unit to overheat and
my damage the unit.
Use ON/OFF button to turn on unit. Follow
procedure in OPERATION section.
Reset circuit breaker. If circuit breaker
continues to trip, contact Authorized Service
Agent or Hatco for assistance.
Contact Authorized Service Agent or Hatco for
assistance.
Contact Authorized Service Agent or Hatco for
assistance.
11
WARNING
Corrective Action
Publicidad
