Kohler K-16101 Guia De Instalacion página 4

Escutcheon
Nut
Valve
Shank
Adjustment
Screw
2. Faucet Installation
Insert the yoke through the lavatory faucet holes so the cold
valve (blue) is on the right.
Press to firmly seat the spout shank in the yoke.
Remove the escutcheon nuts from the bonnets, and thread them
to the valve shanks. Securely hand-tighten.
Thread the adjustment screws into the yoke, and tighten them
evenly against the hold-down plate until secure.
Press the spline adaptors about halfway onto the valve stem
splines.
Loosely install the bonnets to the escutcheon nuts, and partially
assemble the handles to the valve stems.
Check the alignment of the handles. For further alignment,
remove the handles and bonnets, and reposition the spline
adapters on the valve stems until the handle alignment is correct.
Securely hand-tighten the bonnets onto the escutcheon nuts.
Assemble the handles, and install to the spline adapters with a
screw and lockwasher.
Press the plug buttons into the handles.
116370-2-AB
Yoke
4
Bonnet
Spline
Adapter
Escutcheon
Nut
Kohler Co.