Publicidad
Idiomas disponibles
Idiomas disponibles
Automatically: Connect the water tube with the machine left lower corner inlet connector as
right picture arrow marked, please see the picture, and press
Water Filling Port
by manual: open up the top cover, to fill in water according to the pic 3, stop filling in water
MANUAL DE INSTRUCCIONES
again when you hear beep sound.
If the water shortage alarmed during the sterilizing, you should not worry about it, the water will
not influence this process. The water that had been left in the tank is adequate for the
operating cycle, but you need to add water in time, so as to ensure the next operation.
CAUTION
USE DISTILLED WATER ONLY TO EXTEND THE LIFE TIME OF THE
Water Filling Port
MACHINE.
If the water shortage alarmed during the sterilizing, you should not worry about it, the water will not influence this process.
DO NOT TILT THE STERILIZER WHEN THE RESERVOIR IS FULL OF WATER.
The water that had been left in the tank is adequate for the operating cycle, but you need to add water in time, so as to
ensure the next operation.
If the water shortage alarmed during the sterilizing, you should not worry about it, the water will
CAUTION: USE DISTILLED WATER ONLY TO EXTEND THE LIFE TIME OF THE MACHINE. DO NOT TILT
6.3 Alarming if Used Water Reservoir is full
not influence this process. The water that had been left in the tank is adequate for the
THE STERILIZER WHEN THE RESERVOIR IS FULL OF WATER.
operating cycle, but you need to add water in time, so as to ensure the next operation.
Alarming if Used Water Reservoir is full
OPEN THE DOOR BEFORE WORKING
CAUTION
USE DISTILLED WATER ONLY TO EXTEND THE LIFE TIME OF THE
MACHINE.
DO NOT TILT THE STERILIZER WHEN THE RESERVOIR IS FULL OF WATER.
6.3 Alarming if Used Water Reservoir is full
OPEN THE DOOR BEFORE WORKING
The LCD screen shows WATER DRAINING ARROW during the sterilizing, which means that the used water reservoir needs
to be drained out.
Connect the water tube to the machine left lower corner inlet connector as right picture arrow marked, please see picture.
The LCD screen shows WATER DRAINING ARROW during the sterilizing, which means that
the used water reservoir needs to be drained out.
Connect the water tube to the machine left lower corner inlet connector as right picture arrow
marked, please see picture.
CLOSE THE DOOR
No. ASS0010
Used water outlet
Generally, the maximum temperature of drained water should be under 70ºC. If it is higher, you need to check whether
The LCD screen shows WATER DRAINING ARROW during the sterilizing, which means that
the fan operates normally, or contact the local distributor immediately, we will offer our best service to you in no time.
the used water reservoir needs to be drained out.
Connect the water tube to the machine left lower corner inlet connector as right picture arrow
6.2 Program selection
marked, please see picture.
•
Turn on main switch.
•
Press PROG key (4) to access the options PROGRAM and CONFIGURATION.
•
Press the UP key (2) to access the preset programs.
•
Select the program with keys (2) and (3).
No. ASS0010
•
Confirm by pressing PROG key (4).
J
.P. SELECTA s.a.u.
CODIGO 80416 REV D
CLOSE THE DOOR
REV-D
REV-D
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
Water Filling Port
Water Filling Port
Used water tank full alarm
5.2 Menu
5.2.1 Main menu
When you open the power switch you will see the operation information
the window.
Used water tank full alarm
Open the door before working
CLOSE THE DOOR
press
button to enter the choosing menu,
PROGRAM
SET
button for 3 seconds;
12/2023
Page 29 of 48
Page 29 of 48
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 39
Steam Ster
EMERGE
134℃-04min
(0001
PRINTER
12-05-2012
Publicidad
