Beurer BY 90 Instrucciones De Uso página 21

Press the Bluetooth
open, the baby scale can be connected for 120 seconds.
3. The baby scale is successfully connected to the app once the Bluetooth® symbol illu-
minates permanently in the display.
Transfer of the measurements
A maximum of 10 measurements can be stored.
• Press the Bluetooth
app is opened. The Bluetooth
when there is a successful connection until the data is transferred. After successful
transfer of the measurements, the scale switches off automatically.
Deactivating the AUTO HOLD function
If you wish to use the baby scale without the AUTO HOLD function, you can deactivate
the AUTO HOLD function.
1. Once "0.000 kg" appears on the display, the AUTO HOLD function can be deactivated
by pressing the HOLD button for 3 seconds.
2. As soon as "0.000 kg" appears on the display, the baby scale is ready to take measure-
ments.
3. Now place the baby on the weighing surface. Do this very carefully; do not let the baby
fall and take particular care with the baby's head.
4. To establish the baby's weight, press the HOLD button. The recording of the weight is
confirmed in the display when the HOLD symbol flashes for 5 seconds.
4. The weight is displayed for 120 seconds and then it switches off automatically. Press
the ON/OFF/TARE button
off the baby scale, press and hold the ON/OFF/TARE button
5. To reactivate the AUTO HOLD function, press and hold the HOLD button for 3 seconds.
Note: If the HOLD symbol + ON appear in the display, the AUTO HOLD function is
activated.
TARE function
If you prefer not to place the baby directly onto the weighing surface, but instead onto a
hand towel, for example, you must place the hand towel on the baby scale before swit-
ching it on. If you have placed a towel or other objects on the baby scale when it is alrea-
dy switched on and you would like to remove these again before weighing, you can also
use the TARE function. Once you have pressed the TARE button, "TARE" is shown in the
display. To reset the baby scale to "0,000 kg", you have to remove the towel or additional
weight from the baby scale and press the TARE button again.
Using the tape measure
Pull out the tape measure on the top of the baby scale if
you want to measure the baby. In order to reel the tape
measure back into the baby scale, press the round button
next to the tape measure on the bottom of the baby scale.
You can manually enter the height and head circumference
of your baby in the
"beurer BabyCare" app.
button whilst the baby scale is in operation. If the app is
®
button . starts to flash in the display (120 seconds) until the
®
symbol is then shown continuously in the display
®
to take another measurement. In order to manually switch
21
for 3 seconds.