Beurer BY 90 Instrucciones De Uso página 23

9. WHAT IF THERE ARE PROBLEMS?
Display
Incorrect weight
is displayed.
Incorrect weight
is displayed.
Incorrect weight
is displayed.
No Bluetooth
®
connection
( symbol is
missing).
App
Cause
No flat, stable surface.
The maximum weight
capacity of 20 kg has
been exceeded.
No flat, stable surface.
The baby is wriggling too
much.
Incorrect zero point of
scale.
Device outside the range. The range in the open is Approx. 15 m.
Bluetooth is switched off
®
on the scale.
No connection to the
App.
The batteries in the scale
are empty.
The baby scale has not
been synchronised with
the App. All measurements
carried out prior to
synchronisation of the
baby scale with the App
cannot be transferred.
Solution
Place the baby scale on a flat surface
without carpet. Re-tare the baby
scale.
The maximum weight capacity of 20
kg has been exceeded.
Place the baby scale on a flat surface
without carpet. Re-tare the baby
scale.
Try to calm the baby so that it stops
wriggling.
Switch the baby scale off and on
again. Wait until the baby scale
displays "
0.000
measurement.
Walls and ceilings reduce the range.
Other radio waves may interfere with
the transmission. Therefore, do not
position the baby scale near devices
such as WiFi routers, microwaves and
induction hobs.
Press the Bluetooth
lights up in the display.
Completely close the App (including
in the background). Switch Bluetooth
off and back on again. Switch the
smartphone off and back on again.
Remove the batteries from the baby
scale for a short period and reinsert
them.
See FAQs at www.beurer.com.
Replace the batteries in the baby
scale.
Connect the baby scale to the App
(see "Initial use with the App" section).
23
kg" and repeat the
button until
®
®