Publicidad
Idiomas disponibles
Idiomas disponibles
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Eye Protection
Wet Conditions Alert
Risk of Injection
Risk of Explosion
Kickback
Electric Shock
Chemical Burns
V
Volts
A
Amperes
Hz
Hertz
W
Watt
Alternating Current
n o
No Load Speed
.../min
Per Minute
SYMBOLS
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Do not expose to rain or use in damp locations, and never direct
a water stream toward any electrical device.
To reduce the risk of injection or injury, never direct a water stream
towards people or pets or place any body part in the stream. Leak-
ing hoses and fittings are also capable of causing injection injury.
Do not hold hoses or fittings.
Do not spray flammable liquids. Flammable liquids and their vapors
are explosive and can cause severe burns or death.
To reduce the risk of injury from kickback, hold the spray wand
securely with both hands when the machine is on.
Do not use near electric power lines or receptacle outlets.
To reduce the risk of injury or damage, DO NOT USE ACIDS,
ALKALINES, BLEACHES, SOLVENTS, FLAMMABLE MATERIAL,
OR INDUSTRIAL GRADE SOLUTIONS in this product.
Voltage
Current
Frequency (cycles per second)
Power
Type of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
5 — English
DESIGNATION/EXPLANATION
Publicidad
