Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the Dirty Water Tank
1. Press the dirty water tank release button, while pulling the tank out.
2. Hold the bottom of the dirty water tank, while pressing the button on the top of the dirty
water tank. Take out the solid waste bin upward, and empty the solid waste and dirty water
respectively.
3. Rinse the dirty water tank and solid waste bin with tap water.
Notes:
• Use the cleaning tool for assist.
• Clean the full tank sensor frequently to avoid adhesive stains from affecting its detection
accuracy.
Solid Waste Bin
Full Tank Sensor
Dirty Water Tank
4. Install the solid waste bin, then re-install the dirty water tank onto the vacuum cleaner until you
hear a "click", which indicates that it is installed in place.
10
click
Publicidad
