OSOTEK Horizon H200 Lite Manual De Usuario página 15

Cleaning the Vacuum Cleaner
Stand the vacuum cleaner upright, and use a dry cloth or paper towel to clean the dust from the
vacuum cleaner.
Troubleshooting
• The display will show an error message and a buzzer notification will be played when the
vacuum cleaner is not working normally, please refer to the table to find the solution.
• If the error cannot be solved by the solution, please contact the after-sales service team in time.
Error icon Error message
Insufficient water in the
clean water tank.
Check whether the
roller brush is entangled
or blocked by foreign
objects.
The dirty water tank is full. Clean the dirty water tank and re-install it.
The dirty water tank is not
E1
installed.
Check whether the suction
port of the floor brush and
E2
the pipeline of the dirty
water outlet are blocked.
E3
E4
E5
Fault code.
E6
E7
E8
14
Solution
Add water to the clean water tank before use.
Check and clean the roller brush.
Re-install the dirty water tank correctly.
Clean the pipeline and dirty water tank.
Contact the after-sales service team.