Publicidad
Idiomas disponibles
Idiomas disponibles
4. Use tap water to rinse the roller brush and its cover until they are clean.
6. Re-install the roller brush and its cover in order. When re-installing the roller brush cover, align it
Note:
with the mounting position, and it is secured in place when you hear a "click".
Do not expose the roller brush to direct sunlight.
5. Use a dry cloth or paper towel to remove the hair, dirt, and foreign objects blocked at the suction
port.
Notes:
• Do not rinse the floor brush directly.
• Do not touch the gearbox right after using the vacuum cleaner to avoid scalds.
click
Gearbox
12
Publicidad
