OSOTEK Horizon H200 Lite Manual De Usuario página 6

How to Use
Charging the Vacuum Cleaner
After powering on the charging dock, align the charging pin at the bottom of the floor brush with
the charging pin of the charging dock, and the charging starts until you hear a "beep" from the
vacuum cleaner.
Notes:
• Please fully charge the vacuum cleaner before the first use and after each use (charging time:
4-5h).
• The battery may be overheat after continuous use for long-time cleaning. In this case, it is
normal that the charging may take longer time or the battery level may remain constant in a
short time.
Notes:
• The battery level is shown in numbers on the LED
screen.
• 5 minutes after the battery is full, the LED screen
will go off.
Buttons
Shift Button:
Press to switch
mode during
cleaning.
Power Button:
Press to turn on/
off the vacuum
cleaner.
LED Screen
Insufficient Water in the
Clean Water Tank
Dirty Water Tank Full
Standard Mode
Turbo Mode
5
Self-Cleaning Button:
Press to enable or
disable the self-
cleaning.
Battery Level Indicator
Other Error
Roller Brush
Tangled
Self-Cleaning Mode
Suction Mode