Blackstone 6961 Manual Del Propietário página 6

OWNER'S MANUAL | ASSEMBLY GUIDE
Place the oven base on its back� Remove the four (4) M8
STEP 02
flange nuts from the four (4) oven feet�
Use the four (4) M8 flange nuts to attach the heat shield and four (4)
oven feet to the bottom of the oven base�
Remove the eight (8) M6x12 screws from the oven body
STEP 04
side panels�
Use four (4) M6x12 screws to install one (1) side handle and two (2)
mica sheets to the oven body left side panel�
Repeat with the oven body right side panel�
06
Remove the oven body from its packaging and place it on a
STEP 03
smooth flat surface�
Remove the four (4) tapping screws from the upper brackets�
Use the four (4) tapping screws to attach the vent cover to the
upper brackets�
Slide the square stone into the upper oven chamber
STEP 05
brackets�
Center the round stone on the floor of the oven chamber�
Remove the one (1) M5 screw from the door handle� Use
STEP 06
the one (1) M5 screw to attach the door handle to the front of the
oven door�
Model: 6961
BLACKSTONEPRODUCTS.COM/SUPPORT