EDIFIER S769D Manual página 3

Important safety instructions
Power warning:
1. Place the product near the power outlet.
2. Before use, make sure that the operating voltage is the same as your local power supply. Correct operating voltage can
be found on the product plate.
3. For safety purpose, unplug the product during lightning storms or when unused for extended periods of time.
4. Under normal conditions, the power supply may get hot. Please keep good ventilation in the area and exercise caution.
5. Safety warning labels on the housing or bottom of the product or power adaptor.
This symbol is to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is to warn the user not to disassemble the enclosure of the product and there is no user-replaceable
part inside. Take the product to an authorized service center for repair.
This symbol indicates that the product is for indoor use only.
The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.
WARNING!
The unit is of Class l construction and must be connected to a mains socket outlet with a protective earthing
connection. Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
2
English