Craftsman 135.17240 Manual Del Usuario página 10

USINGTHE LOCK-ON BUTTON
(Figure 5)
The Lock-On button (see Fig, 5), located
in the handle of your saw, allows you
tun your saw at maximum Stokes per Minute
without squeezing the trigger switch_
1. To lock the triggerswitch ON, squeeze
the trigger switch,push the button in
and then release the trigger switch.
Fig. 6 Lock-On Button
2. To unlock the trigger switch, squeeze
trigger and than release without pushing in button.
NOTE: If the lock-on buttonis continually being pushed,
the trigger switch cannot be released_
USING THE TRIGGER SWITCH TO
CONTROL VARIABLE SPEED (Model 17240 Only')
This saw is equipped with a variable speed trigger switch. The saw can be
turned ON or OFF by squeezing or releasing the trigger switch_
The speed of the blade can be adjusted by the pressure you
apply to the trigger _Nitch.
1. To increase the speed, apply more pressure to the trigger switch.
2. To decrease the speed, apply less pressure_
USING THE VARIABLE SPEED DIAL TO
CONTROL VARIABLE SPEED (Model 17241 Only, Figure 6)
This saw is equipped with a variable speed dial. The blade speed
(SPM) can be adjusted dunng the cutting operation
by posi_oning the dial on or between any one of the six numbers:
1. Setting 1-2 for low speed
2. Setting 3-4 for medium speed
2. Setting 5-6 for high speed
10