Blackstone 2144EU Manual Del Propietário página 5

Model: 2144eU
ASSeMBlY INSTRUCTIoNS
Find a large, clean area to assemble your appliance�
Remove all packing material before assembling�
Sharp edges. Wear gloves while assembling.
Place the griddle body upside down on a smooth flat
STEP 01
surface� Thread the four (4) griddle feet into the bottom of the griddle�
Set the griddle on its feet� Place the griddle top and hood on
STEP 02
the griddle body by aligning the four (4) pins to the holes of the body�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
BLACKSTONEPRODUCTS.COM/SUPPORT SUPPORT BLACKSTONE EUROPE.COM
CAUTIoN
TOOLS NEEDED:
#3 Phillips head screwdriver &
Adjustable wrench
NOT INCLUDED:
lPG cylinder
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg) Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
lPG cylinder must include collar to lPG cylinder must include collar to
protect lPG cylinder valve. protect lPG cylinder valve.
NOT INCLUDED:
17" griddle base
ASSEMBLY GUIDE
TOOL NEEDED:
#3 Phillips head screwdriver
NOT INCLUDED:
lPG cylinder
Use the two (2) M6x16 screws pre-installed in the hood
STEP 03
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g) Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
handle to attach the hood handle grommets and the hood handle to
the front of the hood�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
NOT INCLUDED:
22" griddle base
Make sure the front pins are
seated in the holes, then push
the griddle top back�
| OWNER'S MANUAL
TOOL NEEDED:
Adjustable wrench
NOT INCLUDED:
ELECTRIC REQUIREMENTS:
AA battery
120V 60Hz
NOT INCLUDED (OPTIONAL):
Two (2) d batteries
TOO
5mm
NOT
one
opti
(for
05