Eaton TRIPP LITE Serie Instrucciones De Instalación página 2

Installation
Instalación / Installation /
Installation / Installazione
Note: When the unit is connected to the USB-C port on your
computer and to a network via Cat5e/6 cabling, a network
connection will be automatically established. If no connection
is made, you can manually establish one by going to your
computer's network settings page. For example, on a Mac,
navigate to the Network section found in System Preferences,
click the 'Assist Me' button to get to the Network Setup
Assistant, then follow the prompts to establish a connection.
1. Connect the adapter's USB-C connector to the
USB-C port on your laptop, tablet or other
compatible device.
2. Connect the adapter's HDMI port to the
monitor's HDMI port using an HDMI cable (such
as P568-Series).
3. Charge your device by connecting its USB-C
charger to the adapter's USB-C port.
4. Connect a USB device to the adapter's USB-A
hub port.*
5. Connect the adapter's RJ45 port to a network
using a UTP cable (such as N201-Series Cat6
cables).*
*Refer to the USB-C Features table in the Owner's Manual
for the features your product supports.
2