Publicidad
Idiomas disponibles
Idiomas disponibles
Dear customer
Please familiarize yourself with the proper
usage of the device by reading and following
each chapter of this manual, in the order
presented. Keep these operating instruc-
tions for further reference.
Please read the enclosed "General safety
instructions for power tools" and all
additional safety instructions in this
operating instructions!
This manual contains important information
on operating and handling the device. Keep
these operating instructions for further
reference. Please pass it on along with the
unit if it is handed over to a third party.
Battery and charger not included!
The Maxxpack batteries and chargers are
available online and in participating stores.
1. Explanation of the symbols
The following symbols are used in the user
manual or on the product:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non-observance of the instruc-
tions in this manual.
Always wear hearing protection.
The effects of noise can cause
hearing loss.
Wear safety glasses. When working
with electric power tools, sparks,
splinters, chips and dust particles
may be generated and these can
cause loss of sight.
Wear protective headgear.
Wear safety gloves.
Wear sturdy shoes.
Do not expose to rain or water.
Beware of kickback.
7064196-36V-Chainsaw-Ma-2202-22.indb 7
7064196-36V-Chainsaw-Ma-2202-22.indb 7
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the manufac-
turer confirms that this Electric tool
complies with the applicable Euro-
pean directives.
Do not dispose of electric power
tools with domestic refuse.
2. Additional safety instructions for
chain saw
a. Keep the chain saw out of reach of
children. It is not a toy.
b. Please note the warning symbols. They
mark all those instructions which are
important for safety reasons. Observe
these instructions as failure to do so
could result in serious injury!
c.
The chain saw must be used only by
one person at a time. Make sure
bystanders do not stay in the vicinity of
the chain saw's work area.
d. Check the safe operating condition of
the chain saw, in particular the guide
bar and the saw chain, before each
operation.
e.
Always have a safe stand when working
with the saw.
Hold the machine firmly and securely
f.
when switching on.
g. Make sure the guide bar and the saw
chain must be free when switched on
and must not come into contact with
the workpiece to be cut.
h. Guide the chain saw onto the workpiece
only when switched on. Otherwise there
is a risk of kickback if the saw chain
gets caught in the workpiece.
i.
When the cut is completed, switch off
the machine and then pull the saw
chain out of the cut only after it has
come to a standstill. This way you can
avoid kickback.
j.
Clamp the material to be processed
well. Do not support the workpiece with
your hand or foot. Do not touch objects
or the floor with the saw running. Dan-
ger of kickback.
English
7
09-05-2022 15:33
09-05-2022 15:33
Publicidad
